FAQ Topic

EXOR | FAQ - Designer

FAQ - Designer

Assignment of the IP address to a panel

June 19, 2017

UniOP is providing the users with the maximum flexibility in the assignment of the IP address. There are several ways to do this and well defined priority rules in order to understand which will be the address used in every situation.

FAQ - Designer

Does Exor operator panels supports the connection with Siemens S5 plc family?

June 19, 2017

What to know

The UniOP Designer operator panels family support the connection with Siemens S5 plc family, using the SimaticS5 communication protocol.

FAQ - Designer

Can I downgrade the firmware of my operator panel?

June 19, 2017

What to know

The firmware downgrade operation of a panel consists in the installation of a firmware version that is older than the firmware version installed on the operator panel at production time (version reported on the panel informations sticker).

FAQ - Designer

How can I download/upload an application to/from a Designer series operator panel using an USB flash drive?

June 19, 2017

What to know

The eTOPxxC series, eTOP300 series and eTOP04C operator panels have an integrated USB port that can be used to programmer the device trough an USB flash drive.

FAQ - Designer

Upgrade firmware of FW55 panels with UniDataExchanger

June 19, 2017

What to know

We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at techsupp@exorint.it before proceeding with any modify to the firmware of your operator panel, Firmware...

FAQ - Designer

Upgrade firmware of FW56 panels with UniDataExchanger

June 19, 2017

What to know

We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at support.it@exorint.com before proceeding with any modify to the firmware of your operator panel, Firmware...

FAQ - Designer

Upgrade firmware of FW53 panels with UniDataExchanger

June 19, 2017

What to know

We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at support.it@exorint.com before proceeding with any modify to the firmware of your operator panel, Firmware...

FAQ - Designer

Upgrade firmware of FW52 panels with UniDataExchanger

June 19, 2017

What to know

We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at support.it@exorint.com before proceeding with any modify to the firmware of your operator panel, Firmware...

FAQ - Designer

Upgrade firmware of FW54 panels with UniDataExchanger

June 19, 2017

What to know

We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at support.it@exorint.com before proceeding with any modify to the firmware of your operator panel, Firmware...

FAQ - Designer

Upgrade firmware of FW38 panels with UniDataExchanger

June 19, 2017

What to know

We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at support.it@exorint.com before proceeding with any modify to the firmware of your operator panel, Firmware...