PoE Injector | Panel mounting
Suitable for JSmart all sizes
- Rugged PoE Injector for JSmart HMI Series
- 10/100 Ethernet compatible
- Panel mounting on 22 mm hole
Power-over-Ethernet (PoE) Injector for maximum simplicity of connection using standard CAT5 wiring.
Overview
The continuing reduction of control cabinets in particular is increasing the need for input stations that can be installed flexibly.
The JSmart Accessories offer IP67 protection and decisive advantages when it comes to positioning operator terminals at the most convenient locations on the machine through JSmart support arm system.
Downloads
Technical Data
| Features | |
|---|---|
| PoE Standard | IEEE 802.3af/at |
| Output Power | 36W max |
| DC Output Voltage | +54 Vdc |
| Data rates | 10/100 |
| Interface | |
| Ethernet IN port | 10/100 |
| Ethernet OUT port | 10/100 PoE |
| Diagnostic LEDS | 3 |
| Ratings | |
| Power Supply | +24 Vdc (18-32 Vdc) |
| Current Consumption | 2.0 A at 24 Vdc (max.) |
| Efficiency | 80% typ |
| Over Voltage / Current Protection | Yes |
| Short Circuit Protection | Yes |
| Reverse Polarity | Yes |
| Environment Conditions | |
| Operating Temp | -20°C to +55°C |
| Storage Temp | -30°C to +80°C |
| Operating / Storage Humidity | 5-85% RH, non-condensing |
| Protection Class | IP67 EN60529 front cabinet |
| Dimensions and Weights | |
| Faceplate LxH | 80x120 mm |
| Depth D | 28 mm |
| Weight | 350 g |
| Approvals | |
| CE | Emission EN 61000-6-4, Immunity EN 61000-6-2 for installation in industrial environment |
| UL | cULus: UL61010-1 / UL61010-2-201 |
Ordering Information
Ordering code::
+JSPOU0P2
