Skip to content

PoE Injector | DIN rail mounting

Suitable for JSmart all sizes
  • Rugged PoE Injector for JSmart HMI Series
  • 10/100 Ethernet compatible
  • DIN rail mounting

Power-over-Ethernet (PoE) Injector for maximum simplicity of connection using standard CAT5 wiring.

 

 

Overview

The continuing reduction of control cabinets in particular is increasing the need for input stations that can be installed flexibly.

The JSmart Accessories offer IP67 protection and decisive advantages when it comes to positioning operator terminals at the most convenient locations on the machine through JSmart support arm system.

Downloads

Technical Data

Features
PoE StandardIEEE 802.3af/at
Output Power36W max
DC Output Voltage +54 Vdc
Data rates 10/100
Interface
Ethernet IN port 10/100
Ethernet OUT port 10/100 PoE
Diagnostic LEDS 3
Ratings
Power Supply +24 Vdc (18-32 Vdc)
Current Consumption 2.0 A at 24 Vdc (max.)
Efficiency 80% typ
Over Voltage / Current Protection Yes
Short Circuit Protection Yes
Reverse Polarity Yes
Environment Conditions
Operating Temp -20°C to +55° C
Storage Temp -30°C to +80°C
Operating / Storage Humidity 5-85% RH, non-condensing
Protection Class IP20 EN60529
Dimensions and Weights
Faceplate LxH 80x120 mm
Depth D 28 mm
Weight 350 g
Approvals
CE Emission EN 61000-6-4, Immunity EN 61000-6-2 for installation in industrial environment
UL cULus: UL61010-1 / UL61010-2-201

Ordering Information

Ordering code:: +JSPOU0P1

Services

Make or buy
Embedded Design
Digital Assessment