FAQs

What to know Using eTOP Series HMI you can deliver effective HMI and control solutions based on JMobile and CODESYS V2. eTOP Series HMI products have been designed to include the CODESYS v2 internal ...

What to know Touchscreen component may require calibration during operator panel lifetime, calibration procedure can be recalled using two procedures: standard and emergency. Calibration procedure ...

What to know There are no restrictions to adding new communication drivers in Designer. Drivers are available upon request, please write to Exor technical support department at techsupp@exorint.it

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at ...

What to know Exor JMobile and Designer products line includes the possibilty to have an CODESYS v2 integrated PLC on the operator panel.

What to know Starting from JMobile Studio 1.80 all 400 and 500 series panels can run a VNC server. VNC allow customer to remote HMI screen desktop to give remote support on field. This FAQ will help ...

What to know The PLIO03 optional integrated IO module have 4 analog input channels, these channels can be programmed in Type and Scale to allow different kind of measures. Below you can find and ...

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immediately Exor International technical support department at ...

What to know With JMobile is possible to print and report in PDF format. This FAQ explains how to set print option to print in a network shared folder and how to read a PDF file from a shared folder.