FAQs

What to know We strongly recommend to perform firmware upgrade only when this is required, please if you have any doubt contact immedialtely Exor International technical support department at ...

What to know Exor Designer serie operator panels uses battery type CR2430 from Renata or equivalent from another producer, it is a 3V 270mA lithium battery, not rechargeable. Such battery model can ...

What to know The communication between a PC running Designer or UniDataExchanger software and an operator panel requires the panel itself to be switched in Configuration Mode status. This document ...

What to know JMobile provides three different levels of security:

What to know It is possible to dump recipe data to a specific location using the action "DumpRecipeData". This action will save a CSV file, that contains the selected recipe data present in the HMI. ...

What to know JMobile Windows Client provides an option to handle the visualization of the timestamp information of a project.

What to know The CODESYS internal PLC, available for eTOP Series HMI can support up to 4 contemporary master connections from external devices communicating via CODESYS v2 or v3 Ethernet protocol.